How to Cut Skirting Board

In this blog we will list the equipment needed and go through each step in order to achieve successful cutting of skirting board.

Equipment you will need:

  • Skirting board (obviously)
  • Mitre saw – also known as a circular saw or bench saw.
  • Tape measure
  • Clamps
  • Pencil

How to cut the skirting board

Most skirting boards are made up of MDF, follow the steps below to enable you to cut your skirting board.

  1. Measure the wall where you intend on putting your skirting board. It’s a good idea to measure twice so you only cut once!
  2. Next, measure the skirting board and mark a line with a pencil so you know where you will be cutting.
  3. Make sure your mitre saw is on a strong and sturdy surface before you begin.
  4. Place the skirting board onto the mitre saw and line up the blade with your pencil line.
  5. Once you are happy clamp the skirting board so it doesn’t move around, then confidentially cut down in one motion.
  6. Unclamp your skirting board and then you are now ready to fix it to the wall.

In another blog we will talk about how you fix the skirting board to the wall, but a few things you will need when doing this are nails, adhesive and sealant.